Track Mounted Drill Rigs

FRASTE MULTIDRILL XL

Mounted on Morooka Rubber Tracked Carrier.

Fraste Multidrill-XL
Fraste Multidrill-XL
Fraste Multidrill-XL

Height:
12′ 0″ (3.66m) mast down
26′ (7.92m) mast raised

Length:
28′ 0″ (8.54m) tower down
18′ 0″ (5.49m) body length

Width: 9′ 0″ (2.75m) deck width

Weight: 37,000 lbs (16,800 kg)

Ground Pressure: 5.25 psi (4.6 psi at 6″ penetration)

Equipped:

  • Centerline Mono Mud Pump & 435 Bean Pressure Pump
  • IR 400/200 air compressor
  • Rubber tracks
  • Double clamp systems for breaking rod joints
  • 140 lb automatic SPT hammer
  • 2 winch lines

Auxiliary Equipment:

  • Hitachi C45G rubber tracked support unit – provides drill rod and casing storage as well as a water tank

Capable of:

  • Mud rotary
  • Diamond drilling coring
  • ODEX casing systems
  • Auger (solid stem & hollow stem)
  • Automatic dynamic cone penetration (DCPT)
  • Angle drilling
  • In Situ Testing, CPT

FRASTE MULTIDRILL MDXL-2, 3

Mounted on a rubber tracked carrier.

FRASTE MDXL-2
FRASTE MDXL-2
FRASTE MDXL-2

Height:
9′ mast down
27′ mast up

Length:
20′ 6″ tower down
11′ 6″ body length

Width: 8′ 6″ total width

Weight: 17,000 lbs (7711 kg)

Ground Pressure:
6.6 psi / Sinking in 6″ – 5.9 psi
6″ penetration 2.73 psi (.32 bar)

Equipped:

  • Centerline Mono Mud Pump & 435 Bean Pressure Pump
  • Rubber tracks
  • Double clamp systems for breaking rod joints
  • 140 lb automatic SPT hammer
  • 2 winch lines

Capable of:

  • Mud rotary
  • Diamond drilling coring
  • ODEX casing systems
  • Auger (solid stem & hollow stem)
  • In Situ Testing, CPT

FRASTE MULTIDRILL ML

FRASTE ML
FRASTE ML
FRASTE ML

Height:
9’5″ (2.8m) mast down
25′ 0″ (7.6m) mast raised

Length:
25′ 0″ (7.6m) Mast down fully extended
18′ 0″ (5.4m) Mast down tower folded
Track length 5.83′ (1.78m)
Track width 0.8′ (0.25m)

Width:
4.8′ (1.45m) Track to track
10.5′ (3.2m) Panel extended

Weight: 9,890 lbs (4,486 kg)

Ground Pressure: 8.5 psi

Equipped:

  • 4 speed rotary head
  • Screw type moyno style mud pump
  • Double clamp systems for breaking rod joints
  • 140 lb automatic SPT hammer
  • Rubber tracks
  • Rotary head tilts out for ease of tooling connections

Capable of:

  • Mud rotary
  • Diamond drilling coring
  • ODEX casing systems
  • Auger (solid stem & hollow stem)
  • Automatic dynamic cone penetration (DCPT)
  • In Situ Testing, CPT

MARL M1.3T

This versatile rig is equipped with independent hydrostatic drive. The rubber coated steel tracks allow access to difficult sites whether it’s soft hilly terrain, under a service station canopy or in tight congested warehouse conditions.

MARL M1.3T
MARL M1.3T
MARL M1.3T

Height: 8′ 2″ (2.49m) mast raised

Length: 6′ 4″ (1.93m) mast raised

Width: 3′ 0″ (0.91m)

Weight: 2,075 lbs (941 kg)

Ground Pressure: 2.7 psi

Torque: 1,300 ft/lbs

Equipped:

  • 48″ stroke
  • Lombardini diesel engine
  • Rubber coated tracks

Capable of:

  • Augering (solid stem & hollow stem)
  • Dynamic probing & sampling
  • ODEX drilling

MARL M-5T

This versatile rig is equipped with independent hydrostatic drive and rubber coated steel tracks allowing access to difficult sites such as under service station canopies and tight congested warehouse conditions. This rig maneuvers well on soft, hilly terrain.

MARL M-5T
MARL M-5T
MARL M-5T

Height:
10′ 6″ (3.21m) w/o crown
12′ 2″ (3.71m) w/ crown
7′ 6″ (2.26m) mast down

Length: 12′ 0″ (3.6m) mast down

Width: 5′ 0″ (1.5m)

Weight: 12,100 lbs (5,488 kg)

Ground Pressure: 6 psi (4 psi at 6″ penetration)

Torque: 6,000 ft/lbs

Equipped:

  • 72″ stroke
  • 4 hydraulic stabilizers
  • Isuzu diesel engine
  • 4,000 lb capacity winch
  • Rubber coated tracks

Capable of:

  • Augering (solid stem & hollow stem)
  • Dynamic probing & sampling
  • DCPT with automatic 140 lb trip hammer
  • ODEX casing systems